Brackets to Install Keel Rollers Above a Boat Trailers Frame
Question:
I am trying to add 10inch rollers to help center a 18foot boat when putting it back on a Yacht Club 1818B bunk trailer. The problem is that the cross members are too low to install the rollers . So, is there an aftermarket plate that can be used to raise the roller bracket or are we looking at fabricating a bracket?
asked by: Phil B
Expert Reply:
If I understand what you're trying to do I think we can help.
We have the Adjustable Mounting Brackets for Keel Rollers # CE32004G. They'll install onto your trailer's frame and will hold a keel roller that is the width of the frame plus 2 inches.
If you need a 10 roller # YR1000Y will work on the brackets using # CE10726A.
If I missed the mark and misunderstood you just let me know.
Products Referenced in This Question
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8"
- Boat Trailer Parts
- Rollers
- Roller Shafts
- 5/8 Inch Diameter
- Zinc-Plated Steel
- 11 Inch Long
- CE Smith
more information >
Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3-1/8 Inch Diameter
- Thermoplastic - Non-Marking
- 9-3/4 Inch Long
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
CE Smith Adjustable Mounting Brackets for Keel Rollers - Galvanized Steel - 11-1/2" L - 1 Pair
- Boat Trailer Parts
- Rollers
- Roller Bracket
- 11-1/2 Inch Tall
- Galvanized Steel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Does DeeMaxx Disc Brake Kit Include Everything Needed for Installation
- Q&A: Converting Malone MicroSport Heavy Kayak Trailer To a LowBed For Easier Loading and Unloading Kayaks
- Q&A: Disc Brake Upgrade on a 2012 Tandem Axle Boat Trailer
- Q&A: Does The Redline Grease Seal 13194 Have Markings Of TCM 13194 TM and a Spring On The Inside Lip
- Article: Trailer Tire Sizing
- Q&A: Recommended Keel Rollers for Boat Trailer
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Replacement Pre-Greased 5 On 4-1/2" Hubs For Trailers Using L44649 Inner And Outer Bearings
- Article: How to Determine Tire/Wheel Diameter
- Article: Measuring a Trailer Tire
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: How to Bleed Your Trailer Surge Brakes