Recommended Trailer Wiring for a 2016 Volvo V60
Question:
Hi, I have the hitch from e-trailer already installed but need the wiring for the lights. 2016 v60 cross country. Thank you
asked by: Roberto M
Expert Reply:
To add a 4-Pole connector to your 2016 Volvo V60 I recommend going with the Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56287.
This kit will simply T into the tail lights on your V60. You will also need to run the included Black wire up to your battery for power. This will keep the lights on your trailer from affecting the lights on your V60.
I was able to look up and see that the trailer hitch receiver that you purchased from us was the Draw-Tite Max-Frame # 75916 with a 2 inch receiver. Since you will also need a ball mount and hitch ball for any trailer towing I recommend going with our Ball Mount Kit # 989900. This kit comes with 2 ball mounts, a pin and clip, and 2 hitch balls. One of the ball mounts has a 3/4 inch Rise and a 2 inch Drop, and the other with a 2-3/4 inch Rise and a 4 inch Drop. One of the hitch balls has a 1-7/8 inch diameter and the other has a 2 inch diameter.
You will want to do some measuring first though to make sure that these ball mounts will give you the correct Rise or Drop that you need for your application. I have attached a helpful article that demonstrates how to determine what rise or Drop that you will need.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Will Draw-Tite Trailer Hitch Receiver Fit On a 2017 Volvo V60 Cross Country
- Q&A: What is the Coupler Height of the Malone MicroSportXT Trailer # MPG460XT
- Q&A: Does the Stealth Hitch for a 2020 Land Rover Range Rover Require Trimming?
- Q&A: Recommended Trailer Hitch and Wiring for 2018 Volvo V60 R Design
- Q&A: Replacement for Magnetek Model 6345 Converter
- Q&A: Replacement Lamp for Glo-Brite 410 on 2018 Tiffin Motorhome
- Q&A: Locating Driver's Side Connection For T-One Connector on 2012 Volvo XC70
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Receiver Sizes
- Article: My Trailer Hitch Doesn't Fit
- Article: Must-Have Flat Towing Components