Recommended Anti-Sway Weight Distribution System For 33 Foot Toy Hauler With 1200lb Max Tongue
Question:
I own a 33foot Toy hauler max weight 10,000lbs tounge weight 1200lbs I have a serious sway problem that is compounded by fact I pull it with a Ford Excursion! Based on your sales experience witch sway control hitch would you recommend?
asked by: Jim
Expert Reply:
For a weight distribution system with sway control, you will want to account for the total tongue weight. This includes the loaded tongue weight of your 33 foot Toy Hauler as well as any cargo behind the rear axle of your Ford Excursion. You want a system that has that total tongue weight in the middle of its tongue weight range for best results. You will also want to look at your owners manual as 1/2 of the Ford Excursions are not capable of towing that weight, while the other 1/2 are.
Based on the information you gave, I recommend the Reese Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW # RP66130. This is the only system that actively fights sway with its hot rolled spring bars and dual cam system. This system is designed to keep your trailer from sway versus trying to limit the sway when it occurs. This system is extremely adjustable so you can fine tune it for your application. This system is intended to be used on total tongue weight between 800-1500 lbs. You will need the Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW # RP54970 along with the hitch ball # C40030.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank
- Q&A: Is There a Trailer End 4-Round With Wires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Tongue Weight Capacity for a 2020 Chevrolet Silverado 2500
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will 18" Long Equal-i-zer Weight Dist Shank Reduce Tongue Weight Capacity
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Will Lift Bracket RP6637 and Chains 3216 Fit on Pro Series RB3 Weight Distribution System