Replacement Hubs and Bearings for 1994 Shoreland'r Boat Trailer
Question:
I am looking to replace the bearings on my boat trailer. I believe it is a 1994 model Shorelandr. Frame Bundle r1820s. Could you point me in the right direction for the replacement trailer hub replacement?
asked by: Matt H
Expert Reply:
To determine which bearings are used on your 1994 Shoreland'r Boat Trailer, you will need take the hub off and check for the numbers that should be stamped onto the bearings themselves. You can also measure the inner diameter of the bearings or the spindle at the bearing seats if you cannot locate the numbers. I have attached an image that shows where the spindle measurements should be taken. I recommend using a digital caliper like # PTW80157 for exact measurements.
For replacement hubs, you will also need to determine the axle capacity and bolt pattern that you are needing. I have attached an article that will help you determine the bolt pattern on your hubs.
For example, the etrailer.com Trailer Hub and Drum Assembly # AKHD-545-35-K uses the # L68149 inner bearing and # L44649 outer bearing. It is designed for 3,500 pound axles and has a 5 on 4-1/2 inch bolt pattern.
I have attached a couple of helpful articles on trailer hubs and bearings as well as a link that will take you to our available selection of trailer hub assemblies.
![Chris R](https://images.etrailer.com/static/images/catg/people/1101_tn.jpg)
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Correct Replacement Oil Seal 225255UC for Ranger Boat Trailer
- Q&A: Can Dexter E-Z Flex Suspension Kit Replace Dexter 13-10 Equalizer
- Q&A: Replacement for a TDE LP8500 Boat Trailer Acuator
- Article: How to Survive the Winter In Your RV
- Q&A: RV Slide Topper Awning For A 154 Inch Slide Out Box
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Lights Which are Not Working
- Q&A: Does The LaSalle Bristol RV Roof Membrane Ship Folded Or Rolled Up
- Q&A: Replacement Studs for RVD-H-865 7k Hub/Drum
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision