Trailer Wiring Installation Instructions for a 1991 Acura Integra
Question:
1991 Acura Integra sedan In reference to # 119175KIT Do you sell a trailer light connector I could add to this kit so I could just plug it in by the left tail light bulb?
asked by: Dave
Expert Reply:
The only available trailer wiring option for your 1991 Acura Integra would be the Upgraded Circuit Protected Taillight Converter Hardwire Kit, # 119175KIT. There is no T-one plug and play style harness for your vehicle. Installation of the 119175KIT is actually pretty easy, even with little experience.
I have included a couple of videos showing typical installations of this wiring harness. Basically, all you will need to do is to access the wiring behind each tail light. Using the included circuit tester, find the wire behind the left tail light that carries a signal in unison with the left blinker and attach the yellow wire on the harness.
Then, you would do the same for the brake light (red wire), running lights (brown wire), and attach the white wire to a bare metal surface in the trunk area. Route the green wire to the right tail light and attach it to the wire that carries a signal in unison with the right blinker. Put everything back together and you are done.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Towing Capacity of 2005 Honda Pilot and Parts Needed to Tow Trailer
- Q&A: What is the Difference Between the Curt & Draw-Tite Trailer Hitches For a 2006 Honda CR-V
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Wiring Harness for 2003 Honda CR-V With LED Tail Lights
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hardware Kit Availability for Draw-Tite Trailer Hitch # 24790 for a 2000 Honda CR-V
- Q&A: Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1998 Honda CR-V
- Q&A: How To Prevent Sag On 2004 Honda CR-V With Small Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Tow Bar Wiring: Which Wiring Kit is for You?