Recommendation for a Trailer Side 4-Way Flat Connector on Trailer Towed by 2006 Toyota Highlander

Question:

Hi, I have Tow Ready part # 118413 wiring kit for my 2006 Highlander and also have an LED brake light with a one foot wires yellow brown and white. I want a flat four pin trailer end connector that comes with enough wire to reach inside vehicle so that the splice will be inside. Tow ready web site shows a part # 118033 that seems appropriate but I can only find a one foot long part on your site.

asked by: Rachel

Expert Reply:

We have a 20-foot 4-Way trailer side connector, # A20WB. This is a wishbone harness which means that the running light signal is split at the plug and the signal is sent along to each tail light rather than using a jumper wire between the two tail lights for the signal.

We also have a 35-foot harness, # A35W42B, that works the same way. I have included a link to a video showing this harness being installed for reference. Either harness will be compatible with the T-One Vehicle Wiring Harness with Converter and 4 Pole Trailer Connector, # 118413, on your 2006 Toyota Highlander.

expert reply by: Michael H