Recommended Items Needed To Flat-Tow 2001 Jeep Wrangler With U-Channel Bumper
Question:
I am looking for base plates and tow bar to tow a 2001 jeep wrangler sahara with a U channel bumper. Id like to know if any of the recommended base plates can be installed on the factory bumper without drilling/modification. Thanks!
asked by: Karen F
Expert Reply:
Most of the base plates we offer for your 2001 Wrangler do require drilling of the vehicle frame for installation. We do have one kit that does not drill into the frame. It is the Roadmaster Classic # 1417-1. Per the installation instructions this bracket kit is designed to fit on the top and bottom of the bumper and utilizes existing bumper and tow hook mounting points for attachment.
If you decide you will drill through the frame I recommend part # 1420-1. When installing this kit you will need to drill two 1/2-inch holes in the frame of the Jeep.
The tow bar I recommend is the Roadmaster Falcon 2, part # RM-520. I have attached a link to an installation video of this tow bar with a Wrangler you can check out. This tow bar will work with either of the base plate kits I mentioned.
If you are not familiar with flat-towing you can check out the attached helpful articles that explain what is needed when towing a vehicle. You will need lighting on the towed vehicle, safety cables, and a supplemental brake system.
For safety cables I recommend part # RM-643. For lighting I recommend part # RM-2120.
The supplemental brake system I recommend is part # SM99251.
Finally, you will probably need a high-low adapter to tow your Jeep since you want to tow it as level as possible. I have also attached a link to our product page for the adapters we offer.
Products Referenced in This Question
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster Standard Magnetic Tow Lights
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- 20 Foot Long Harness
- Universal
- Magnetic Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms
- Base Plates
- Fixed Drawbars
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Are The etrailer Invisible Base Plate Kits Compatible With The Blue Ox Ascent Tow Bar
- Q&A: Distance Between Tow Bar Arms on etrailer Invisible Base Plate Kit e98946 for Jeep Wrangler
- Q&A: Recommended Flat Towing Setup For 1982 Jeep CJ-7
- Q&A: Tow Bar to Use with etrailer Base Plate Kit that Fits 2001 Jeep Wrangler
- Q&A: Compatible Tow Bars For The etrailer Invisible Base Plate Kit # e98966
- Q&A: What Do I Need To Haul My 1999 Jeep TJ?
- Q&A: Parts Needed to Flat Tow 1993 Jeep Cherokee By Front Bumper
- Article: How to Wire an Electric Winch
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: Flat Towing Package for 2015 Ram 1500
- Article: Roadmaster Vehicle Specific Base Plates
- Article: RV-Mounted vs Vehicle-Mounted Tow Bars
- Article: How to Choose a High-Low Adapter
- Article: Base Plate Adapter Table