Measurements Of The Single Axle Trailer Fender With Top Step Style C For 8-13 Inch Wheels
Question:
On item #F008551 I can not find the measurement at the mounting holes. If you went hole to hole what is that distance? Also how far apart are those holes?
asked by: Stephen S
0
Expert Reply:
The mounting holes of the Single Axle Trailer Fender w Top Step - Style C - Black Plastic - 8" to 12" Wheels - Qty 1 # F008551 are 2-1/2 inches center on center and are 1/2 inch by 1/2 inch. I've attached a photo with some other measurements to assist.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Single Axle Trailer Fender w Top Step - Style C - Black Plastic - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- Top Step
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 7 Inch Wide
- 21-1/2 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Continue Researching
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: CE Smith Crossmember Pad for Boat Trailers - Black Poly Plastic - 10" Long
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Q&A: Trailer Fender Installation Brackets for CE Smith Trailer Fenders
- Q&A: Bearings Seem Loose on Strait Trailer Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: CE Smith Trailer Fenders - No Step - CE19501 Review
- Video: Roadmaster Safety Chains and Cables RM-910648 Review
- Shop: HitchMate Boat Trailer Step - 5" Wide x 9" Long - 400 lbs
- Shop: Single Axle Trailer Fender w Top Step - Style C - White Plastic - 8" to 12" Wheels - Qty 1
- Q&A: Replacement Springs for Fulton Boat Trailer
- Q&A: Modern Tire Size Replacement for 6.9 - 9 Size
- Q&A: 1995 Coleman Utah Replacement Leaf Springs Needed
- Q&A: Replacing Old Slipper Springs and U-Bolts
- Q&A: Which Way Do Slipper Springs Face on a Trailer
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Floor Mats