Availability of Trailer Hub to fit 1-1/6 inch Diameter Spindle
Question:
Need hub assembly for 1-1/16inch straight spindle trailer. Prefer 4-lug model. Trailer was in fire. Ruined 5-lug hubs having to drive off spindle due to years of rust. Old hubs had LM67048 bearings in inner and outer side of hub. Weight no a factor as it hauls a sailboat off less than 250 lbs.
asked by: Hugh R
0
Expert Reply:
The hub part # AKIHUB-440-2-2K fits a spindle that has spindle diameter of 1.06 where the inner and outer bearings ride. It also has a 4 on 4 inch bolt pattern.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: Correct Replacement for Dexter Hub/Drum 8-415
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range C and Load Range D Tires
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 2023 Best Gifts for RVers & Campers