Do the 2016 Hyundai Santa Fe and Santa Fe Sport Use the Same Hitches and Wiring
Question:
Our 2016 Hyundai Santa Fe has the third row. Does it need the same hitch and wiring harness as the Santa Fe Sport?
asked by: Casey
Expert Reply:
The 2016 Hyundai Santa Fe and Santa Fe Sport use different trailer hitches. If you do NOT have a Sport model then you can use Curt trailer hitch # C13153. The Sport models use # C13152.
For the wiring the Sport and regular Santa Fe will use the same harnesses but which harness depends on if the vehicle has the factory tow package or not. The dealer should be able to tell you how the vehicle is equipped by looking up the VIN. If it does have the factory tow package then it is prewired for a harness and you can use # C56332. If it does not have the factory tow package you can use # C56184.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Q&A: Will the Kuat Sherpa 2.0 2-Bike Platform Rack Block a Rear Backup Camera
- Q&A: Are There Different Size 4-Way Round Connectors Available?
- Q&A: Aero Bar Roof Rack that Fits 2022 Toyota Highlander
- Q&A: Recommended Hitch for a 2014 Hyundai Santa Fe Sport
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Determine if 2015 Kia Sorento EX Has Factory Tow Prep Package
- Q&A: Correct Replacement Load Stops for TracRac Ladder Rack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size