What Wheel Diameters Fit Behind the Trailer Idler Hub Assembly # AKIHUB-545-35-K
Question:
What wheels sizes work with this?
asked by: Dan D
0
Expert Reply:
The mounting flange and cone of the hub that goes through the wheel's pilot diameter of the Trailer Idler Hub Assembly # AKIHUB-545-35-K that you referenced requires rim diameter of 13 inch to 17-1/2 inch in diameter.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Do etrailer.com Brake Assemblies Come With The Hub/Drums?
- Article: Trailer Maintenance Schedule