Availability of 10 inch Self-Adjusting Brakes
Question:
I am searching for self adjusting brakes to fit 4400# Lippert axles on my Open Range RV. Current installed electric brakes use a 10 inch drum. Do you carry self adjusting brakes for these axles? Thanks.
asked by: Charles
Expert Reply:
I have found a set of brake assemblies for your Lippert axle.
The etrailer Electric Trailer Brake Kit, # AKEBRK-35-SA, are both left and right brake assemblies. These assemblies are self-adjusting that only require an initial set-up at installation. Once installed, the brakes will self-adjust as part of the assemblies normal operation. The brake assemblies are 10 inches x 2-1/4 inches.
I also recommend using # L11465 Wheel Bearing Grease, # L70025 Deluxe Bearing Packer, and, if needed, # L30200 Grease gun to repack your wheel bearings after installing your brake assemblies.
i have attached an installation video that will show you have to adjust the self-adjusting brakes at installation.
Products Referenced in This Question
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
LubriMatic Standard-Duty, Lever Action Grease Gun
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 6000 psi
- 14 oz
- LubriMatic
more information >
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer