Thickness and Width of Hangers in the Dexter Tandem-Axle Trailer Hanger Kit HAP-103-203-02
Question:
I was looking at this spring hanger kit. What is the thickeness of the metal? How wide is the center equalizer mounting point Where it attaches to the trailer frame How wide are the front and rear mounting points?
asked by: Blaine R
1
Helpful Expert Reply:
The metal used in the hanger kit part # HAP-103-203-02 for the hangers is 3/16 inch thick. The hangers are for 3 inch wide slipper springs so that means the overall width is 3-3/8 inches.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 42-1/4" Axle Spacing
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 3 Inch
- Tandem Axle
- Redline
more information >
Continue Researching
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 42-1/4" Axle Spacing
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Shop: Replacement Brake Pads for Dexter Disc Brakes - 10,000 lbs and 12,000 lbs - Semi-Metallic - Qty 4
- Shop: Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Shop: Replacement Caliper Retaining Shoulder Bolt for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
- Shop: Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
- Shop: Kodiak Disc Brake Kit - 11.35" Rotor - #120 Spindle - 12K - ALKO
- Search Results: wheels
- Search Results: wheel
- Search Results: wheel only
- Search Results: line kit
- Search Results: brake line kit
- Search Results: caliper
- Search Results: 7~169
- Video: Titan Trailer Brakes T0980100 Review
- Video: Demco Trailer Brakes DM05982 Review
- Video: Redline Trailer Brakes 310798 Review
- Video: Titan Trailer Brakes T0776500 Review
- Video: Dexter Axle Trailer Brakes BP18-045 Review
- Q&A: Replacement Hardware List for B and W Gooseneck Hitch part # BWGNRK1313
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Spring Mounting Hardware - DX77XR
- Video: Dexter Bronze Bushing Review
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How to Determine Proper Spacing Between Tire and Fender for Clearance on 3000 LB Trailer
- Q&A: Leaf Spring Bushing with 5/8" I.D. and 1" O.D.
- Q&A: Replacement Suspension Bushing for Dexter 10K to 15K Trailer Axles
- Q&A: Are Leaf Spring Bushings Hard to Replace
- Q&A: Hanger/Equalizer Kit and Bushings for Tandem Axle Trailer With Bent Hangers
- Q&A: Replacing old Trailer Rubber Bushings Inside of Serrated Bushings on a 1965 Holmescraft RV