Recommended Electric Brakes and Hub and Drum Assembly for 3,500 Pound Axle
Question:
i have a trailer with 3500 lbs axle with no brakes. i wanted to know if this parts go together the electric brake AKEBRK-35-SA with hubs AKHD-655-35-EZ-k
asked by: Lupillo V
Helpful Expert Reply:
The etrailer.com Electric Trailer Brake Kit # AKEBRK-35-SA will work perfectly with the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K referenced in your question. The Brake Kit will include both left and right electric brake assemblies and they have a 4 bolt mounting flange pattern.
You will just want to make sure that the Hub and Drum Assembly is compatible with your trailer spindles. This assembly has # L68149 and # L44649 inner and outer bearings and # L68111 and # L44610 inner and outer races. The included grease seal has a 1.719 inch inner diameter and a 2.565 inch outer diameter. You can verify the bearings on your hub by pulling them and searching for the number that should be stamped onto the bearings themselves or you can measure the spindle at different spots. I have attached an image that shows the measurements needed. This hub also has a 6 on 5-1/2 inch bolt pattern.
I have attached a couple of helpful articles on this subject as well as demonstration videos for the products mentioned for you to check out.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Size of WeatherTech Side Window Air Deflectors # WT82476 for 2014 Chrysler Town and Country
- Q&A: Troubleshooting Brake Override and Stop/Start Malfunction On 2022 Toyota Highlander Redarc Tow Pro