Available Types of Replacement Manual Pull-Out Steps for Class C RV
Question:
I bent my Class C rv step - the steel one that comes standard and pulls out. Do you sell replacements? Cant find it
asked by: Moe
Helpful Expert Reply:
We do offer all sorts of replacement step/stair assemblies for RVs. These include manual pull-out steps like # SMFP-3100, scissor steps like # TLA8004 and others, all shown on the linked page. You will want to match up the mounting hole spacing from your original steps since it is quite likely that one of our units will fit directly in place of it. You will also want to ensure you select a step that does not reduce your ground clearance once installed.
You can simply click on the type of step you want, and then on the number of steps you need, to then see appropriate options. For each item we provide the mounting hole dimensions to help you find the best match. For example, the 3-step pull-out Flexco # SMFP-3100 bolts up to mounting holes spaced at 25-3/8-inches side to side, and either 5-1/2- or 7-inches front to back as shown in the linked photo.
![Adam R](https://images.etrailer.com/static/images/catg/people/477_tn.jpg)
Products Referenced in This Question
TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 22 Inch Wide Step
- 27-1/2 Inch Wide
- 4 Steps
- 7-1/2 Inch Drop/Rise
- Ground Contact
- Aluminum
- TorkLift
more information >
Product Page this Question was Asked From
Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 28-1/8 Inch Wide
- 3 Steps
- 8 Inch Drop/Rise
- No Ground Contact
- Steel
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Measure for Motorhome Steps
- Q&A: Can 2019 Nissan Rogue Be Towed Behind a Motorhome
- Q&A: Options to Vent a Storage Compartment on an RV
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Testing the Hydrastar 1600 PSI Electric/Hydraulic Actuator for Proper Function
- Q&A: Bleeding Brake Lines During Installation of HydraStar Electric Over Hydraulic Actuator HBA16
- Q&A: How To Determine Which Pin Box I Have and What Replacements Are Available
- Q&A: Determining The Correct Gen-Y Gooseneck Pin Box For A Jayco Seismic Fifth Wheel Trailer
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Article: Top 10 Upgrades for Your Camper
- Article: 7 Steps to Clean Your RV Awning, Prevent Mold, and Save Money
- Article: How to Measure Your Trailer Wheel Bolt Pattern