High/Low Hitch Adapter for Tow Bar Use

Question:

I have a 2016 Fleetwood Southwind 34A and I tow a 2007 Toyota Matrix. I measured and there is a 10 inch difference between the receiver and the tow bar. I am planning on getting an 8 inch hi-low hitch. First is that good enough, or should I get the 10 inch? Secondly, can I also add a Swagman Platform Style bike rack to that? If yes, what parts would I need?

asked by: Roger S

Expert Reply:

A tow bar will ideally be dead-level when connected at both the RV and toad but it is permissible for either end of the bar to be up to 3-inches above or below level, but no more than that. In your case a high/low hitch adapter with 8-inches of drop will get you in the ballpark but one with 10-inches of drop will be better, such as Blue Ox # BX88132.

We do not offer any high/low hitch adpaters with your required drop that also have a second receiver to allow use of a hitch-mounted accessory item like a bike rack. We do have item # RM-077-4 but this offers only 4-inches of drop.

expert reply by: Adam R