Seal Recommendation for Trailer Hub Assembly DX22XR That Fits Spindle Diameter 1.50 inch
Question:
The dimensions of this kit appear to fit the spindles I have on a boat trailer except for the grease seal inner diameter. My spindle diameter where the seals ride is 1.5OD and this kit has seals with a 1.68inch ID. Do you have the same kit except with 1.5inch ID seals? Ultimately, I just need a kit to fit my spindles. Any help would be appreciated!!! Thanks,
asked by: Bodie C
0
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.500 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Replacement For Titan Trailer Hub 17214
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Q&A: Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Brakes for Dexter 4,400 Lb Axle with 023-478-00
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Q&A: What Spindle Does Titan Trailer Hub # DX22XR Fit
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Using a Portable Generator on RV
- Article: Trailer Tire Sizing