Could Valterra Adjustable Water Regulator be Used with Y-Fitting for Dual Hoses

Question

Question:

would I be able to hook up 2 hhoses to this regulator, if I can do you have the piece to use

asked by: Liz M

0

Expert Reply:

There's no reason you couldn't run a Y-fitting on the out side of the Valterra Water Pressure Regulator part # A01-1117VP. We do not carry the fitting at this time though.

expert reply by: Jameson C

0

Answer 1

I recommend upgrading to the Valterra Adjustable Water Regulator #A01-1117VP. It uses a higher quality gauge and they offer a Replacement Gauge #A01-1125 in the event it is damaged. You will also be able to adjust your water pressure with this…

view full answer...

Answer 2

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 3

Thanks so much for that info Tyler, and I was able to find the right Gen-Y gooseneck pin box for you. Since you have the Lippert Rhino on your 2024 Jayco Eagle 355MBQS, the right option is the following: - Gen-Y Hitch Shock Absorbing 5th Wheel to…

view full answer...

Answer 4

Thanks for the picture of your build sheet! It does look like the etrailer 6-Leaf Double-Eye Spring item #e94SR you purchased is the correct replacement spring. Feel free to email me back a picture of your suspension but unless you are flipping your…

view full answer...

Answer 5

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 6

So Carl, I checked and your 2024 Brinkley Z-3100 has a Rhino box style pin box so the correct Gen-Y gooseneck Executive is the part #GY98GR. Since your 2024 Ford F-350 has a short bed and the nose of the trailer is a bit wider I would recommend going…

view full answer...

Answer 7

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 8

Hi Alain, thanks for the question and yes, you made a very nice choice for your Grand Design Reflection 337RLS going with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR. This is a very good kit…

view full answer...

Could Valterra Adjustable Water Regulator be Used with Y-Fitting for Dual Hoses

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching