Using Old Bearing Numbers to Find the Correct Replacement Bearing Kit for an Interstate Trailer
Question:
Hi, I am looking for a replacement bearing kit for a 2008 dual 3500# axle with greaseable spindles, enclosed trailer, model # 1714TA2. I did some research and it looks like kit BK2-100 is the right kit. I tried to get some specs from Interstate bought trailer used but didnt have any luck. Could you point me in the right direction? Thanks.
asked by: Craig
Expert Reply:
The best way to find the correct replacement bearings is to get the numbers stamped onto the metal of the inner and outer bearings that are currently on the trailer. With those you will be able to find the correct replacement bearings, races, and seals. If you find that the outer bearing number is L44649 and the inner bearing is L68149, then this is probably the correct kit. You will also want to check that the seal has an inner diameter of 1.719 inches.
I have included a link to a video on inspecting trailer bearings that should help you when removing the old bearings.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels