Idler Hub Recommendation to Replace Dexter Hub Drum with 8-147 Stamped on it
Question:
can drum be change to a nonbrake hub to use reg trailer wheel
asked by: Mike
0
Expert Reply:
According to my online research, your axles are old Dexters with a capacity of 3500 lbs.
I would recommend confirming this by checking the reference numbers on your bearings. The inner bearings should be # LM48548 (1.375 inch inner diameter), outer bearing should be # L44649 (1.06 inch inner diameter) and the grease seal should be # 58846. If these reference numbers match up then you would want the # AKIHUB-545-35-K for a 5 on 4-1/2 inch bolt patter.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Article: Rooftop Cargo Carriers
- Article: How to Choose the Right Trailer Hitch Class
- Article: RV and Camper Types, RV Classes
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Q&A: Recommended Spare Tire Cover for 265/70R17 Size Tire
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: 7-Way Furrion Power Adapter Fix For 2021-2022 Chevrolet/GM Trucks
- Q&A: Recommended Load Resistor Adapter for Furrion Observation Camera on Travel Trailer for Signal
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Installation on 2016 Mercedes-Benz Sprinter
- Article: How to Tell the Weight Rating of a Trailer Axle