Weight Distribution System Recommendation for Forest River Shamrock 23 Foot
Question:
My tow vehicle is a 2004 Chevrolet Silverado LS 1500 with the 5.3L engine. My camper is the Forest River Shamrock 23 ft. Dry weight around 4500 lbs. Im looking for a weight distribution with sway control hitch. What is the best to purchase for my setup? Thanks
asked by: Michael L
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
It's hard to get an exact tongue weight figure that your trailer would have when loaded since you listed the dry total weight to be 4,500 lbs, but realistically the Strait Line part # RP66083 would be your best option in that regard most likely. It has a tongue weight range of 400-800 lbs and features the only sway control on the market that works to fight sway before it starts.
If you need a higher rated setup we have the part # RP66084 which has a tongue weight range of 600-1,200 lbs and has the same great sway control.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Comparing Weight Distribution Systems that Use Chains Versus No Chains
- Article: Determining Trailer Tongue Weight
- Q&A: Does Torklift 36 inch Hitch Extension for Ford 3 inch Hitch Have Capacity for 6,700 lb Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Troubleshooting External Sensor Error on Lippert Leveling System
- Q&A: Weight Distribution Recommendation for 2022 Honda Ridgeline Towing Trailer with 450 lb Tongue Weight
- Q&A: Weight Distribution Recommendation for 2021 Jayco SLX 8 224 BH
- Q&A: Which Blue Ox Weight Weight Distribution System for Lance 1475 Trailer