What is the Torque Rating for the Castle Nut to Hold on Trailer Idler Hub # 8-259-50UC1-EZ
Question:
What is the torque setting on the axle nut for this hub? Thank you for your time
asked by: Matt S
0
Expert Reply:
I checked with Dexter and on light duty hubs such as # 8-259-50UC1-EZ they recommend the castle nut be tightened to 50 foot pounds. If that makes it too tight then back off the nut some until it is no longer overly tight and the hub can be spun by hand.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: Weight Capacity of Dexter P-12 SLR SN: D5287869 Axle
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Axle Options For Dexter TORFLEX Torsion Axles
- Q&A: Will Trailer Idler Hub Assembly # AKIHUB-545-2-LF-2K Fit 2,200 lb Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing