Recommended Brake Assemblies For Dexter Axle 3500 lb And 5200 lb
Question:
Wanna replace the brakes on my trailer. Dexter Axle P- 12 SN- 01278419 Can u help me find the brake assemblies?
asked by: Brian B
Expert Reply:
I reached out the the manufacturer and found that they have two possible axles that meet that criteria. One is definitely more likely your application than the other, but I will give you both brake assembly options.
For a 3500 lb axle, you will want the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. This will give you both the left and right assemblies. There is a sticker to help you with which assembly fits which side. These assemblies are self adjusting, so only an initial adjustment is needed at install and you can use the adjusting spoon # W80630. If you need the mounting hardware, it is # BIK-00.
For a 5200 lb axle, you will want the 12 inch assemblies # AKEBRK-7-SA. For mounting hardware you will need # 7-5, # 38N, and # 38LW.
Products Referenced in This Question
Lock Washer for Brake Mounting Bolt for 12" Brake Assemblies - 3/8" Diameter
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Washers
- ABS Fasteners
more information >
Replacement Nut for Trailer Suspension U-Bolts or 12" Brake Assemblies - 3/8" Diameter
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- 3/8 Inch Diameter
- Nuts
- Suspension Nut
- ABS Fasteners
more information >
Brake Mounting Bolt for 12" Brake Assembly
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Brake Mounting Hardware Kit for 7" and 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 7 Inch
- 10 Inch
- Redline
more information >
Brake Adjustment Spoon for Drum Brakes
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- Adjuster
- Brake Adjuster Tool
- Performance Tool
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle