Trailer Hub Recommendation that Fits Spindle with 1 inch Bearing Diameter
Question:
i have a 1 inch straight axle , what hub can i use with the 5x4.5 pattern
asked by: Scott
0
Expert Reply:
For an idler hub that has the bolt pattern you need of 5 on 4-1/2 inches and fits a spindle that measures 1 inch for both bearing surfaces we have the part # AKIHUB-545-2-1K. If you needed a brake drum hub you instead would want part # AKHD-545-2-1K.
expert reply by:
Jameson C
0
Products Referenced in This Question
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Q&A: How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Q&A: How To Measure Bearings, Seals, And Spindles For An Axle
- Q&A: Can Trailer Hubs Have Different Size Inner and Outer Bearings
- Q&A: Replacement EZ Lube Spindle For 3,500 LB Axle
- Q&A: Pre-Greased Trailer Hub for Floe Pro 100 Snowmobile Trailer
- Article: Trailer Lighting Requirements
- Article: How to Measure a Trailer Axle