Recommended Ball Mount Draw Bar For 1-1/4 Inch Trailer Hitch Receiver With 4 Inch Rise
Question:
Good Afternoon: Ive looked around on your website but dont see what I need. Im looking for a drawbar with a 4inch rise to fit into a 1 1/4inch receiver that will accept a ball with a 1inch shank. So far I only see ones that have a 3/4inch hole for the ball. Do you carry the type Im looking for? Thank you.
asked by: Tom P
Expert Reply:
The 3/4 inch diameter is a typical size for the 1-1/4 inch hitch receivers. Normally the 1 inch diameter hitch ball is used on a 2 inch receiver ball mount. I have linked the page to the ballmounts that are available for your 4 inch rise and 1-1/4 inch receiver. I recommend the Sportframe Drawbar 4" Rise 2000 Kit # 3594 which has a 10 inch length from center of hitch pin hole to center of ball with 4 inch rise.
I recommend the 2 inch hitch ball # 19258 or the 1-7/8 inch hitch ball # 19256 to go with this ball mount.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Hitch Receiver For 2023 Hyundai Elantra Hybrid
- Q&A: Recommended Hitch for a 2023 Hyundai Elantra
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Correct Trailer Hitch Fit for a 2006 Scion xB
- Q&A: Hitch and Wiring Recommendation for a 2006 xB
- Article: Trailer Hitch Receiver Sizes
- Q&A: Recommended Hitch for a 2023 Kia Soul
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB