Trailer Brake Light Malfunction with Wiring Harness on 2007 Chrysler PT Cruiser
Question:
I installed a new tralier light kit on my trailer, i own a 2007 Chrysler PT crusier and on my car it has a 5 way flat harness and my trailer has a 4 flat so I have to put a 5 wire to 4flat converter and when I did that everything worked but my brake lights, when I step on the brakes both my brakes on my car and trailer flash a few times then turn off, do you know what I need to do to fix this?
asked by: Kyle W
Expert Reply:
Since the brake lights on both your trailer and Chrysler PT Cruiser seem to get power when you press on the brake, just to quickly lose it, there may be an issue with the ground wire connection on your tail lights. The connections from your vehicle are probably good, which is why the brake lights are able to initially turn on. But a bad ground connection will prevent the lights from holding the provided power long enough to function properly.
I recommend relocating the tail light grounds to a nearby clean, rust free area on the frame of your trailer. You can also try to redirect all of the ground wires to the same, main ground portion on the tongue of your trailer frame for the most secure and clean connection.
If this does not solve the problem, let me know and I will try to research further.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will the Curt Trailer Wiring Harness for a 2015 Jeep Compass Kill the Battery With Trailer Unplugged
- Q&A: How to Wire a Third Brake Light on Trailer
- Article: Flat Towing Package for 2006-2007 Chevrolet HHR
- Article: Flat Towing Package for 2007 Honda CR-V
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: What are Popular Vehicles to Flat Tow Behind a Motorhome
- Q&A: Equipment Needed For Flat Towing Vehicle Behind Motor Home
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Install Wiring Harness On a 2006 PT Cruiser
- Q&A: Trailer Wiring harness Recommendation for a 2008 Chevy HHR
- Q&A: Troubleshooting Brake Lights Blinking on a 2006 PT Cruiser When Pluged Into Trailer Harness
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)