Parts Needed to Install Brake Controller in 1991 Winnebago on Ford Chassis that has 4-Way

Question:

I have a 1991 Winnebago Warrior on an E350 chassis. I currently have a 4 pin wiring set up with no brake controller. I need to change to 7 blade now that Ive purchased a trailer with brakes. I will also need to install a brake controller. I would like to order everything that I need from you guys, and I was wondering if youd have any insight on what product Id need. Thanks!

asked by: Shawn

Expert Reply:

You would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. Due to the length of your vehicle you will want some extra wire with part # 10-2-1 so that everything reaches properly.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

expert reply by: Jameson C