How to Measure Trailer for Trailer Cover

Question

Question:

Trailer is 20ft. prox., but measures 24ft. overall, to hitch. What dimension do we use?

asked by: DAVID W

0

Expert Reply:

The measurement for this cover is from the back of the trailer to the front of the trailer. The measurement does not include the A-frame of the trailer that connects to the hitch. As long as your trailer body is no longer than 20-22 feet long and no more than 102 inches wide, this cover will fit on your trailer.

expert reply by: Jon G

0

Answer 1

The Classic Accessories PolyPro III Deluxe Travel Trailer Cover part #052963732634 is a great fit for your trailer. It's designed for trailers that are between 20 and 22 feet like yours and has zippered access panels that will line up with the…

view full answer...

Answer 2

Using a different amount of washers in the head of the Reese weight distribution system part #RE34FR will allow you to adjust how much spring bar tension is used. The more washers are used the further down the bars will point and the more amount of…

view full answer...

Answer 3

Yes, the Reese Weight Distribution System with Shank part #RE34FR will work on a 4,500 lb trailer. That said, hitch weights listed online are dry and you also need to add the weight of any cargo behind the rear axle. Therefore, you are likely…

view full answer...

Answer 4

For your 2020 Starcraft Autumn Ridge Travel Trailer you will want the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer item #AD97ZR. This cover fits trailers up to 20' long. It will protect your trailer during long-term storage in…

view full answer...

Answer 5

It looks like you currently have the Adco SFS AquaShed RV Cover #290-52243. While your current cover should still be covered under warranty. There is an option that will better suite your needs. The Adco Olefin HD RV Cover for Travel Trailers #AD87ZR…

view full answer...

Answer 6

The Drive Wireless RV Backup Camera System #324-000002 that you referenced can fit your 2019 238 RK Gulfstream Ameri Lite but you would need to cut off the connector you sent a picture in to wire it to the included connector that comes with this kit.…

view full answer...

Answer 7

If your Xterra was not equipped with the factory tow package the port under the vehicle where the 4-pole trailer connector like part #C55441 plugs in will NOT be fully active. There is a jumper harness and relays that are needed to activate the tow…

view full answer...

How to Measure Trailer for Trailer Cover

Product Page this Question was Asked From

Continue Researching