Can 2010 Jeep Wrangler with Blue Ox Base Plate Kit be Towed by Roadmaster Tow Bar
Question:
I have a Falcon 5250 towbar do they make adapters for the blue ox base plate? Trying to flat tow a 2010 Jeep wrangler
asked by: Maurice
Expert Reply:
Yes, the Roadmaster adapter part # RM-031 is designed to allow a Blue Ox base plate kit # BX1126 to attach to a Roadmaster tow bar like your Falcon # RM-520.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Blue Ox Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Blue Ox
more information >
Roadmaster Tow Bar Adapter Brackets for Blue Ox Base Plates
- Accessories and Parts
- Base Plates
- Tow Bar
- Adapters
- Roadmaster to Blue Ox
- Roadmaster
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Trailer Wiring Diagrams
- Article: Must-Have Flat Towing Components
- Q&A: 2024 Ford Maverick Wiring Needed for Flat Towing Behind a Motorhome
- Q&A: Does The Demco Baseplate # DM77YV Require That You Trim The Air Shutters/Dam On A Ford Maverick
- Article: How to Choose a High-Low Adapter
- Q&A: How Can I Adapt The SD Non-Binding Tow Bar e34ZR To D-Rings On A Jeep Bumper?
- Q&A: Availability of InvisiBrake Installation Video on 1998 Jeep Wrangler
- Q&A: Parts Needed to Flat Tow 2024 Jeep Wrangler 4xe
- Q&A: Recommended Flat Towing Parts for a 2023 Ford Bronco Badlands w/ a Capable Bumper
- Q&A: Included in Package of Roadmaster Falcon 2 Tow Bar
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)