Disc Brake Recommendation for 2011 Carriage Cameo Fifth wheel 36FWS
Question:
I am looking to change over my 5th wheel to disc brakes. I believe the suspension is mor-ryde with Dexter EZ lube 7000 # . Id like to know what part number I could use to purchase. Thanks,
asked by: Mike W
Expert Reply:
The Kodiak Disc Brake Kit, # K2HR712, will fit 7,000 pound Dexter trailer axles. It is also designed to fit 16 inch and larger wheels with an 8 on 6-1/2 inch bolt pattern. You can check your existing bearing numbers to determine if this kit or another will fit your axle. If you have # 25580 inner bearings and # 14125A inner bearings, 16 inch or larger wheels with an 8 on 6-1/2 bolt pattern, this kit will work.
The bearings and seals for this kit are sold separately, but the races are included. You can use the bearing numbers listed above and seal # RG06-070. I have included a link to the installation details for this kit along with a video showing a typical installation.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Kit for Converting 2018 Cedar Creek 34RL2 to Disc Brakes
- Q&A: Wheel Stud Length for Trailer Hub # 8-231-9UC1-EZ
- Q&A: Correct 1/2 Wheel Stud for Dexter 7K Axle
- Q&A: Hub, Slip On Rotor Kit Recommendation for 7k Timbren Axle Less Kit
- Q&A: Valve Stem Extensions for 2015 GMC Sierra 3500 Dually To Make Inflation Easier
- Q&A: Disc Brake Upgrade Kit for 7,000 lb Trailer Axles to Convert to Electric Over Hydraulic
- Q&A: How To Add Disc Brakes To a High-Tech Marine Triple Axle Trailer
- Article: Performance Chips and Modules
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Big Truck Big RV
- Article: Most Popular Wheel Bearings