Husky Weight Distribution System Needing 5 Inches of Adjustment at Shank
Question:
I am interested in husky center line, but need 5 inches of drop. Will my current shank work?
asked by: Tomjennings
Expert Reply:
It sounds like you are interested in a shank for the Husky Center Line Weight Distribution w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW, # HT32217. This weight distribution system comes with the shank that has a maximum rise of 6-1/2 inches and a maximum drop of 1-1/4 inches.
If you need a different shank for larger drop or rise, you will want the Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment, # C17123.
If you need a larger drop than that, we also have the Husky Center Line Weight Distribution Shank for 2" Hitches - 12" Long - 6 Hole Adjustment, # HT30859. This will have a maximum rise of 11-3/4 inches and a maximum drop of 13-1/4 inches. It has a 5 hole adjustment separated by 1-1/4 inches on center.
If you have a current weight distribution shank, it may work with this system if the holes are spaced 1-1/4 inches on center and it is rated for the capacity needed.
Products Referenced in This Question
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >