Compatibility of Disc Brake Kits for Idler Hubs on Boat Trailer
Question:
Team, I have a Vault brand, torsion, idle spindle system on my boat that I would like to keep. The torsion spindle has a built in four bolt pattern mount for a caliper bracket. Will this hub less rotor fit my existing spindle? My trailer is a 2015 McLane tandem with 2100 GAWR and 15inch tires. The bolt pattern is 5 lugs, 4.5.
asked by: Sam G
Expert Reply:
The Kodiak Disc Brake Kit # K2R35S is designed for 3500-lb-rated axles that have idler hubs and allows converting them from idler to disc brake operation. The bolt pattern determines whether they will fit on your idler hubs; and they will fit a #84 spindle like # TRU64FR.
This system would brake too aggressively if installed on a 2100-lb GAWR axle. Brakes should always be selected based on the axle weight rating; this is true for disc or drum brakes.
Typically a 2100-lb axle will have electric drum brakes. The lowest-rated disc brakes kits we offer are for 2000-lb axles and are shown on the linked page. These include hubs and fit only on wheels up to 13-inches (wheels, not tires).
If you can tell me the inner and outer bearings in your current idler hubs I can check options for compatible hub/rotors with the 5-on-4-1/2 bolt pattern that use the same bearings and that will fit your current spindles. A new hub must use the same bearing set in order for it to fit on your spindles.
Products Referenced in This Question
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Bulldog Powered Drive Trailer Jack Review
- Shop: Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 12,500 lbs
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Video: Review of Ark Trailer Jack - Side Frame Mount Jack - ARK54FR
- Video: Kodiak Trailer Brakes 20TA-BLKIT Review
- Video: Demco Hydraulic Brake Line Kit Installation DM5425
- Video: Redline Trailer Brakes BRKH10A Review
- Video: Kodiak Trailer Brakes - Disc Brakes - K2R35DS Review
- Search Results: disc brake conversion kit
- Search Results: disc brake kit
- Search Results: triple axle fenders
- Search Results: power trailer jack
- Search Results: tandem axle brake line kit
- Search Results: trailer jack
- Search Results: hydraulic brake coupler
- Q&A: Difference Between Hydraulic Brake Coupler with Lockout and Without Lockout
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Q&A: Trailer Axle Weight Rating for 2 Inch Square Axle
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM16080-95
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Q&A: Parts Needed for Converting Trailer to EOH Disc Brake Operation
- Q&A: Replacement Trailer Hub Ranger Trail
- Q&A: Difference Between an Idler Hub and a Hub/Drum