Replacement Seal For Flush King Reverse RV Flush Valve

Question

Question:

hi, u folks continue to exceed my expectations with service videos products etc. i have another question i wonder if you could help me with. i have a flush king reverse flush valve and it was great till gasket gave out. how can i get a few new gaskets for my flush king........? thanks repeatedly

asked by: Richard R

1

Helpful Expert Reply:

I called my contact at Flush King and they told me the replacement seals you need are part # T1003-9VP.

These are the seals that go between the clear plastic waste tube and the body of the waste valve.

If this is not the gasket you were asking about let me know and I will see if I can find the gasket you need.

expert reply by: Jeffrey L

1

Answer 1

Hey Tom, yes the replacement seal part #T201 will fit the Valterra Flush King Valve since its the same 3 inch size.

view full answer...

Answer 2

You can definitely try using some lubricant like WD-40 or PB Blaster to see if it will loosen up the handle. Since the mechanics for the handle on the Flush King Reverse Flush Valve #F02-4350 are really simple it shouldn't take much more…

view full answer...

Answer 3

The Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier #Y34ZR will restrict the passenger side door on your 2024 Entegra Expanse. When the arm swings out it will be sitting at that corner of the vehicle which means the door will be able to…

view full answer...

Answer 4

Hey Lamar, The Demco Autoslide 5th Wheel Hitch w/ Slider #DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The only thing you might…

view full answer...

Answer 5

I recommend the Demco Autoslide 5th Wheel Hitch #DM89GV as the best hitch for your 2023 Ram 2500 short bed. This will drop into the factory bed mounts you have without the need for an adapter. This helps to reduce a lot of the noise other hitches…

view full answer...

Answer 6

The lugs of a sewer pipe fitting can not be fixed so you would have to completely replace the fitting. To do that you'll have to first empty out the tank, which since your lug fitting has broken off will require you to hold the hose in place…

view full answer...

Answer 7

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

view full answer...

Answer 8

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of…

view full answer...

Answer 9

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball…

view full answer...

Answer 10

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to…

view full answer...

Replacement Seal For Flush King Reverse RV Flush Valve

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching