Compatibility of a Kuat Sherpa 2.0 and a Curt Round Tube Hitch on a 2012 Volkswagen GTI
Question:
I am interested in purchasing the Curt C11000 for my 2012 VW GTI. Will the Kuat Sherpa 2.0 be compatible with this hitch? Concerning the folded position and insertion depth into the hitch? Becasue this hitch sits under the car, I want to be sure that there is clearance with the bumper with the Kuat Sherpa 2.0 installed and folded up. The description for the Sherpa 2.0 indicates there is 9 inchs from hitch pin hole center to the closest point of contact when folded. Will there be enough room with the 24904 hitch to fold up the Sherpa 2.0 bike rack and not hit the bumper? I was unable to locate a measurement for the Drawtite 24904 from the hitch pin hole to the rear of the bumper.
asked by: Stemmy
Expert Reply:
Using the Kuat Sherpa 2.0 Bike Rack for the 1-1/4 inch hitch, # SH12G, with the Curt trailer Hitch, # C11000 will be no problem on your 2012 Volkswagen GTI.
The Curt Trailer Hitch is a custom-fit hitch designed for the 2012 Volkswagen GTI. The trailer hitch will bolt on to the frame of your vehicle using existing holes in the frame. Because this hitch is custom-fit, Draw-Tite has designed this product to allow the user the ability to use hitch accessories with little to no interference between the vehicle and the accessory, like a bike rack.
We have not had a chance to install this hitch on 2012 GTI here at our facilities yet. However, I am attaching a video of a very similar 2010 for you to check out. We have had many customers send us feedback and photos on their experience in installing the Curt hitch, and they were very favorable. You will not have any clearance issues with the Kuat rack and this Curt hitch.
Products Referenced in This Question
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Gray
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Wheel Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 1
- Class 2
- Fits 1-1/4 Inch Hitch
- Carbon Fiber Bikes
- Kuat
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Curt Trailer Wiring Harness part # C55567 Fit 2014 Mazda 3 Hatchback
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Q&A: Hitch Rattles Against Exhaust of 2019 GMC Terrain
- Q&A: Why Would Exhaust Rattle On Hitch Installed on a 2015 GMC Terrain
- Q&A: Vehicle Squeaks After Trailer Hitch Install
- Q&A: Replacement For Dexter 072-100-00 4000 lb Leaf Spring
- Article: Trailer Wiring Diagrams
- Q&A: Hitch to Ground Clearance on 2010 VW Golf 2-door 2.5L non-TDI with Curt Trailer Hitch, part # C11000
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Best Bike Racks for Electric Bikes