Will Weight Distribution System RP66082 with a 1-1/4 Inch Drop Work if a 2 Inch Drop is Needed
Question:
I have a 2016 Jeep Cherokee and Im towing a Coachmen Apex Nano 193BHS. The Jeep is 21inch and the trailer tongue is 19inch so on a usual ball mount I need a 2 inch drop. For this WD system it says the shank that comes with it supports a 1 1/4inch drop. What additional parts I need to support my 2 inch drop?
asked by: Nir S
Expert Reply:
You actually would not need anything else with weight distribution system # RP66082 other than a properly sized ball ( # A-90 for a 2 inch or # 19286 for a 2-5/16 inch). The reason is that with the 1-1/4 inch drop from the included shank you are less than 1 inch off of level and the tongue weight of the trailer can even pull down the front of the trailer a little and that will get you to a near perfect level tow.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >