Recommended Wiring And Connectors To Add A 7-Way With A Brake Controller To A 2016 Toyota Tundra
Question:
im looking for a wiring harness for a 2016 Toyota tundra. the one I found says you need a converter if you do not have the towing package, I DO NOT have the towing package so what exactly do I need. I want the custom vehicle fit harness. thanks much.
asked by: Robert W
Expert Reply:
For your 2016 Toyota Tundra, some of the wiring is run for your vehicle even though you don't have the factory installed trailer package. We first need to get the Hopkins Plug in Simple Vehicle Wiring Harness with 4 Pole Trailer Connector, # HM11141835. This will clip into place at the rear of the truck using the included dielectric grease. Then utilizing this 4-Way connection, we will need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires, # ETBC7. This kit will simply plug into your 4 way, and give you everything else you need to wire a brake controller. It comes with the wire, connectors, mount, and the circuit breakers you need. I've attached a video of this installation for you.
For a brake controller to allow you to tow a vehicle with trailer brakes, I recommend the Tekonsha Prodigy P3, # 90195. This controller is a proportional controller which means the trailer brakes will be applied with the same amount of force as you apply the brakes in your truck. There are adjustable settings and 3 boost levels to meet your towing preferences. This controller has an easy to read LCD display that sets it apart. It runs consistant diagnostics and allows you instant clarity without needing to decipher light patterns or codes.
This will be all you need to make your 2016 Toyota Tundra ready to tow like a factory tow package would allow.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: How do You Install a Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells?
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Install Brake Controller Wiring on a 2008 Toyota Tundra SR5 Crewmax
- Q&A: Mounting Inserts for the Redarc Tow-Pro Liberty Brake Controller
- Q&A: No Power at 12 Volt Pin In 7-Way on a 2008 Toyota Tundra
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 4-Way to 7-Way Adapter Recommendation for Installing Curt Echo Brake Controller
- Q&A: How to Install a Brake Controller on a 2018 Toyota Tundra
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller Installation: Starting from Scratch