Can Electric Trailer Brakes Ground Through Aluminum Trailer Frame
Question:
I have an aluminum dual axel trailer and each brake is individually grounded to the aluminum frame. Is this a suitable ground for the brakes?
asked by: Eric R
0
Expert Reply:
Typically for aluminum frame trailers we recommend running the ground wire of each assembly all the way back to the main ground harness of the trailer up by the coupler as aluminum does not conduct electricity well and doesn't always work well for brake grounds.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 31 Feet and Longer
- Plug and Lead
- 4 Flat
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Converting 7-Way Blade To 4-Way Flat On Trailer
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is 16 Gauge Wire Adequate for Trailer Wiring for Lighting
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work