Is Sealant Needed When Replacing Grease Seals and Dust Caps
Question:
Grease seal question - specifically Grease Seal - Double Lip - ID 1.719inch / OD 2.565. I watched the video and no silicone gasket seal was used when replacing the grease seal. And the outer edges do not appear to be covered with viton or similar. Is this ok? Some books recommend using silicone sealant on the grease seal but none on the dust cap? Doesnt make sense to me. Thanks.
asked by: Jerry
Expert Reply:
Sealant is not required when installing a grease seal, like # RG06-050 you referenced. The cap will not need a sealant either. See the help article I've attached that explains the entire process of replacing bearings, races, and seals. I've also attached a video on repacking bearings and installing grease seals you may find helpful.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Viair Portable RV Air Compressor Kit for Class B RVs - 120 psi - 1.47 cfm
- Shop: Grease Seals 10-36 (pair)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Bearings for a 1982 Shoreline Trailer
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: Lug Nut Torque for Loadstar ST215/75D14 Bias Trailer Tire w/ 14 Inch Galvanized Wheel # AM3S560
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: Review of TruRyde 1 Inch Diameter Trailer Spindle Castle Nut - 165686
- Q&A: Replacement Hub Needed for a Karavan SL-3100-DB10-74 Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Replacement Trailer Hub Bearing - L44649
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: fender guard
- Search Results: fender trim
- Search Results: fender skirt
- Search Results: 010~036~00
- Search Results: fender skirts
- Search Results: grease seal puller
- Search Results: spindle nut
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: How to Install the Spindle Nut Kit # RG05-100
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Q&A: Correct Bearing/Race and Castle Nut Kit for 1 Trailer Spindle
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30156 Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Cleaning and Replacing Hubs and Bearings