Recommended Trailer Hitch Receiver and Other Parts to Tow a Trailer with 2015 Ford Fiesta Hatchback
Question:
which hitch fits a 2015 ford fiesta hatchback
asked by: Laurent G
Expert Reply:
The Curt Hitch, part # C11067 will work fine on your 2015 Fiesta. It is a Class I hitch and it has a 1-1/4 inch receiver opening.
If you are looking to do some very light towing with the hitch, I recommend a ball mount as the # C45521 and Pin and Clip # F-4. This ballmount features either an increase of 2-5/8 inches or 3-1/4 inches down.
For a 1-7/8 inch hitch ball, I recommend part # 19256 and for a 2 inch ball, you can use part # 19258.
If you need trailer wiring, I recommend the piece # 118641. You simply plug this harness into the connection points located inside your cargo area, behind the driver-side and passenger-side rear lights. You will need to remove the rear sill, the cargo net, the cargo hatch, and the interior trim panels on the driver and passenger side to access the harness. You must then run hot lead to the positive battery post and you are good to go
When working with electrical connectors, I recommend using dielectric grease such as part # 11755. This prevents dirt and moisture from electrical connections preventing corrosion.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 150 lbs TW
- 1500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Trailer Hitch Fit For 2015 Ford Fiesta ST Hatchback
- Q&A: Is It Okay To Tow A Small Trailer With a 2014 Ford Fiesta Hatchback
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Hitch and Wiring for a 2015 Ford Fiesta SE Sedan
- Q&A: Best Trailer Hitch for 2019 Ford Fiesta Hatchback
- Q&A: Correct Trailer Hitch Fit for a 2016 Ford Fiesta ST
- Q&A: Trailer Hitch Towing Capacity for 2015 Ford Fiesta
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Hitch Receiver Sizes
- Article: 2023 Best Gifts for RVers & Campers