Distance from Hitch Pin Hole to Tangs on Shank of MaxxTow Clevis Hitch MT70034
Question:
What is the length of the shank from the bolt holes to the tangs?
asked by: Bob F
0
Expert Reply:
On the MaxxTow clevis hitch # MT70034 it measures 11 inches from the center of the hitch pin holes to the center of the tang holes and approximately 4 inches from the center of the pin holes to where the tangs are welded to the shank.
There is 2 inches of space between the tangs and from the centers of the tang holes back to the shank it is 3 inches.
expert reply by:
Michael H
0
click to enlarge
click to enlarge
Product Page this Question was Asked From
MaxxTow 2-Tang Clevis for 2" Trailer Hitches - 1" Diameter Hole - 5,000 lbs
- Clevis Hitch
- Clevis Mount
- 2 Inch Hitch Mount
- 5000 lbs GTW
- 1 Inch Diameter
- Standard Shank
- MaxxTow
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is Throat Depth of MaxxTow Clevis Hitch
- Q&A: What Is The Diameter Of The #42 Spindle TRU39FR That Goes In Axle Tube?
- Q&A: Clevis Hitch and Pin to Tow an Agricultural Trailer
- Q&A: Testing for Proper Voltage on the Brake Output Circuit
- Article: Best Bike Racks for Electric Bikes
- Q&A: Can the MaxxTow # MT70034 Clevis be Used to a Tow Trailer with a Lunette Ring
- Article: Trailer Wiring Diagrams
- Article: Must-Have Flat Towing Components
- Q&A: Are The Roadmaster D-Ring Adapters Compatible With A Curt Tow Bar
- Q&A: Size Of Two Position Mounting Channel Included W/ Titan 2-Tang Clevis T1812200
- Article: Where to Position the Trailer Axle?
- Article: Base Plate Adapter Table
- Article: Most Popular Wheel Bearings
- Article: Ram Trailer Tow Prep Package