I Need Replacement Axle Oil Caps For My 1999 Fleetwood Bounder 34J Class A RV
Question:
I Have a 1999 Fleetwood bounder 34j class A RV. I need to replace both axle caps for the rear wheels. the mfg: Dexter -2135 oil cap with a Dexter 46-32 plug. I see you carry the 2136 mode. the diameter Is 2.78 please let me know if you have it in stock? thank you Marcello
asked by: Marcello I
Helpful Expert Reply:
Thank you for all the information you gave. I have the replacement parts you need. It is the Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles, # RG04-230. I also reached out to my contact at Dexter and confirmed this is the proper cap for your vehicle. I've included a review video for this product that references the specific part numbers you referred to.
Product Page this Question was Asked From
Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles and DeeMaxx 8K Oil Bath Idler Hubs
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.875 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Dexter Grease Seal for Seal Part K71-386-00
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Troubleshooting Trailer Break Away System
- Q&A: Where do the Wires of a Trailer Break Away System Install Onto
- Q&A: Bearing Kit for Load Rite Boat Trailer with TDE Hub 46845
- Q&A: How To Add A Brake Controller To A 2022 Hyundai Palisade With Tow Package
- Article: Calculating Portable Generator Power Needs
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template