Availability of Trailer Hub with 4 on 5 inch Bolt Pattern
Question:
I have a 1968 aristocrat. My wheel is 4 bolt, but measures 5inch from bolt to bolt center. Is there any brake assemblies for this wheel?
asked by: Roger
Expert Reply:
If you do indeed have a 4 on 5 inch bolt pattern we have one hub that matches that. For that you would need the part # AH15450ECOMP.
There is a better chance that you have a 4 on 4 inch bolt pattern as that is the most common 4 bolt mounting pattern. I attached a help article on determining bolt patterns as well.
You should also note that when picking out a hub for an axle you have to make sure you pick one that will fit the spindle. To do this you need to measure the spindle where the bearings ride or get the bearing numbers.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Spring Seat for a 2,200 lbs Axle w/ a 1-3/4" Diameter
- Q&A: Adding Brakes to a 2015 Jayco Jay Sport 8SD
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Brakes Needed for 1995 Jayco Pop Up Series 1207
- Q&A: Comparing Trailer Hub and Drum Assembly # 8-173-16UC3 with # 8-276-5
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: How To Determine Axle Capacity of Trailer with 4 Lug Hubs with Brakes
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Repair an RV Roof
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes