Possible Grease Seal Recommendation for Seal with 31 mm ID and 52 mm OD
Question:
am looking for trailer hub seals and dust caps to fit metric. The size seals I need are 31 X 52 x 7 TC. The grease cap is also for a 52mm bore. Thank you.
asked by: Randolf A
Expert Reply:
I converted your mm seal dimensions to inch and found that your seal measures 1.22 inches inner diameter and 2.04 for outer diameter. The closest seal we have to that is the part # 34823 which has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches.
I would recommend you measure your seal again with a digital caliper on the inch setting to see if this is a match. For a caliper you would need the part # PTW80157.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Continue Researching
- Shop: Ratchet Tie Down Straps w/ Storage Bag - 12' Long x 1-1/4" Wide - 830 lbs - Qty 4
- Search Results: ap216
- Video: Deka Jacketed 4-Wire Installation
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Q&A: Replacement for AL-KO 1530116 and 1530117 Brakes
- Q&A: Replacement Bearing Option for Trailer Hub with 30205 Bearing
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Search Results: 52mm grease cap
- Search Results: 52mm dust cap
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs
- Search Results: ratchet straps
- Search Results: c5g1216
- Search Results: 30205
- Search Results: straps
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Shop: Deka Jacketed 4-Wire - 14 Gauge - Per Foot
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Self Adjusting Brake Assemblies for Lippert 8,000 lb Axles
- Article: Most Popular Wheel Bearings
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: How to Raise Your Travel Trailer Height