Does Impact Bar Need To Be Removed When Installing Trailer Hitch On 2015 Volvo V60
Question:
I have a 2015 Volvo V60 and would like to add your trailer hitch that replaces the rear impact bar. The dealer was concerned that this is not a good solution. This said, my concern is how does the replacing the impact bar with your hitch member affect the impact resistance on the rear of the car, and if impacted would the new configuration result in more damage as it looks like the impact bar is made to crumple. Thanks
asked by: Michael R
Expert Reply:
In the installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75916 the impact beam is removed in step 3. It is then re-installed in step 8, so you do not have to worry about the trailer hitch and the amount of damage that would occur with it removed.
The # 75916 is a Class lll hitch and it has a 2-inch receiver opening.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
If you need trailer wiring and your V60 is a 2015-1/2 or newer the wiring kit I recommend is part # C56287.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Do the Raised End Panel Edges Look Like When Installing a Trailer Hitch on a 2009 Volvo V70
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Comparing Curt And Hopkins Wiring Harnesses For 2011 Volvo XC70
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can the Curt T-Connector be Connected to 12V Outlet for Installation on a 2016 Volvo S60
- Q&A: Will Stealth Hitches Trailer Hitches Fit a 2020 Volvo V60 Non-Cross Country Model
- Q&A: Replacement Key For Volvo Roof Cargo Box
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Differences Between Kuat Sherpa 2.0 and NV 2.0 Bike Racks
- Article: Best Bike Racks for Electric Bikes
- Article: My Trailer Hitch Doesn't Fit
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop