Spindle and Idler Hub Assembly for 3500 lb Round Trailer Axle
Question:
Hello will hub AK1HUB-655-35-K work with axle number TRU64FR ? Thank You
asked by: Lowell F
Expert Reply:
The Trailer Idler Hub Assembly, # AKIHUB-655-35-K, with a 6 lug on 5-1/2 inch wheel bolt pattern will fit the TruRyde Spindle # TRU64FR. These parts are compatible for use on a 3500 lb round trailer axle.
When installing these parts, I recommend the LubiMatic Deluxe Bearing Packer, # L70025, along with LubriMatic LMX "Red" Industrial Strength Grease, # L11390. For a grease gun, I'd suggest # L30200.
![Jason S](https://images.etrailer.com/static/images/catg/people/1044_tn.jpg)
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
LubriMatic Standard-Duty, Lever Action Grease Gun
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 6000 psi
- 14 oz
- LubriMatic
more information >
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Q&A: Will Swagman Bike Rack Fit Spare Tire with Hard Plastic Cover
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Q&A: Brake Bolt Pattern and Stub Diameter for #84 E-Z Lube Spindle for 3,500 lb Trailer Axles
- Q&A: Replacement Hub and Drum for a Dexter 8-133
- Q&A: How to Determine Hub and Spindle Size
- Q&A: Replacement Dexter Axle Disc Brake Calipers that have 89-5 Stamped on Them
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle