How to Mount Redline Single-Axle Trailer Hanger Kit Part # APS4 To Trailer Frame
Question:
I ordered APS4 Single Axle Trailer Hanger Kit, I cannot see from the picture but can that be bolted on to the trailer frame?
asked by: Steve O
0
Expert Reply:
I contacted our representative at Redline and he informed me that the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4 Front, 1-1/2 Rear, part # APS4, must be welded to the trailer frame. He informed me that there should be a hole to make a Button Weld.
I would recommend having a trailer professional install part # APS4.
expert reply by:
Reno H
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacing A Dexter P-29 Axle Made Around 1999
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Search Results: double eye
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Q&A: Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Video: Review of CE Smith - Trailer Leaf Spring Suspension - CE14035G40
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 28-5 Review
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Article: Double-Eye Trailer Suspension System Review
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing Plate - HP36VR
- Search Results: fender
- Search Results: slipper
- Search Results: hanger
- Q&A: Recommended Leaf Spring Length for Single Axle Trailer Hanger Spacing of 22-1/2"
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-113275 Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32005G Review
- Q&A: Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- Q&A: Replacement Hangers for Single Axle Trailer
- Search Results: aps4
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Roof Rack