Weight Distribution Recommendation for 2,700 lb Trailer Towed by Ford Flex
Question:
Was wondering what hitch I should use. I will be towing a 2700 lb trailer with a Ford Flex.
asked by: James M
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Since the tongue weight of a trailer is between 10 and 15 percent of the total weight of the trailer your tongue weight is most likely going to be between 270 lbs and 400 lbs.
For a weight distribution system perfect for that tongue weight range you would want the Reese Strait Line part # RP66082 as it has a tongue weight range of 200-600 lbs and features the only sway control that works to fight sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 300 lbs
- 400 lbs
- 500 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w/ Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Weight Distribution Recommendation for Trailer with 900 lbs Max Tongue Weight Rating
- Q&A: Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will B and W Continuum Weight Distribution Work Well with East To West 2900KBH
- Q&A: Weight Distribution System Recommendation for a 2013 Ford F-150 Towing 8500 lb Trailer
- Q&A: Pro Series Snap Up Handle Associated with part # 113913
- Q&A: What is the Difference Between the Draw-Tite and Reese Versions of Dual Cam Sway Control
- Q&A: Recommended RVS Backup Camera System with Large Monitor for Easy Viewing
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch