Parts Needed to Flat Tow a 2006 Saturn Ion with Roadmaster Falcon Tow Bar
Question:
Hi, I recently acquired a Roadmaster Falcon 5250 tow bar assembly from a friend who was using it on his Toyota Tacoma. I would like to use this assembly to tow my 2006 Saturn ION behind my 2006 Gulfstream Independence class A coach. Please let me know what attachments I will be required to purchase to allow me to tow my vehicle? Thanks,
asked by: Louis C
Expert Reply:
Your Roadmaster Falcon Tow Bar part # RM-520 is a great tow bar that would work well for you. You will need to start with a base plate kit confirmed as a fit for your 2006 Saturn Ion. For that you would want the part # 3136-1 which is a confirmed fit. Looks like you have coiled safety cable already too.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot II # BRK2016, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Base Plate for a 2007 Jeep Wrangler
- Q&A: Does Jeep Wrangler Battery Need Charging When Using Curt Tow Bar Wiring
- Q&A: Supplemental Braking System Recommendation for a 2006 Jeep Wrangler being Flat Towed
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: How Does The Blue Ox Patriot System Get Signal To Apply Brakes
- Q&A: Replacement Awning Strut or Support for Carefree Awning
- Q&A: Parts Needed to Flat Tow a 2007 Jeep Wrangler
- Q&A: What Parts Needed to Use a Roadmaster Falcon 5250 Tow Bar on a 2007 Jeep Wrangler for Flat Towing
- Article: What Jeeps Can Be Flat Towed?
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Can You Flat Tow a Ford Ranger
- Article: How to Choose the Right Trailer Hitch Class
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler