Landing Gear Issues After Replacing Motor, Gear Box And Using Repair Kit
Question:
I recently purchased a repair kit from you for a venture landing gear lead leg. It looks like I purchased the following leg kit instead of the lead leg. All of the parts except for the steel Rod looked the same so I went ahead and used it and reused the existing steel Rod I had. Now my gear box is clicking and wont lift the trailer the gear box and motor I purchased from you about a year ago so they are fairly new as well. Would using the wrong kit on the wrong leg cause this issue and would purchasing the correct kit and swapping them possibly fix it? Thanks for your help
asked by: Todd V
Expert Reply:
If you have replaced the motor, gear box and now have used the repair kit the problem may be a nut or screw inside the jack leg, or the rod you mentioned.
It can be difficult to find the problem with a landing gear and you may decide to replace the leg or legs of your landing gear. For a replacement lead leg, part # LG-179013, is rated for 3,000-lbs, is a likely fit. The repair kit for the lead leg is part # LG-146059.
The matching follower leg is part # LG-179014.
Products Referenced in This Question
Lead Jack Repair Kit for Stromberg Carlson Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Hardware
- Repair Kit
- Stromberg Carlson
more information >
Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Stromberg Carlson
more information >
Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Follow Jack Repair Kit for Stromberg Carlson Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Hardware
- Repair Kit
- Stromberg Carlson
more information >
Continue Researching
- Q&A: Venture Bevel Gear Kit Instructions
- Article: Trailer Wiring Diagrams
- Q&A: Follow Jack Repair Kit for 2010 Coachmen Brookstone 341RE
- Q&A: Do the Colors of Trailer Brake Magnets Mean Anything
- Q&A: Useable Length Of Replacement Rail Pins For 5th Wheel Trailer Hitch
- Q&A: How to Wire 12V Battery in Enclosed Trailer to Power Trailer Lights Independent of 7-Way Connection
- Q&A: Installing a Battery on a Trailer and Wiring it to Run Interior Trailer Lights
- Q&A: Landing Gear Repair Kit Recommendation for a VMC900R Set
- Article: Best Ladder Racks
- Article: How Much Solar Power Do I Need For My RV?
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Tie Down a Motorcycle
- Article: 7 Common Questions Everyone Has About Trailer Tires