Trailer Hitch Recommendation for a 2015/2016 Ford Interceptor
Question:
I am installing hitches and wiring on 2015 and 2016 Ford interceptor SUV models. What hitch and wiring will work? These rigs do not have trailer tow.
asked by: Ken R
Expert Reply:
The 2015 and 2016 Police Interceptor versions of the Ford Explorer use the same frame structure as consumer models so hitch fits for standard versions also apply to the law enforcement vehicles. I confirmed this with my technical contact at Draw Tite.
The Draw Tite brand hitch you referenced, part # 76034, is a confirmed fit for both 2015 and 2016 model years of the Explorer. The hitch installs without drilling and includes the required mounting hardware. I have linked for you installation videos for this hitch for both model years.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring you would then want the part # 118540.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Winch Repair Kit for Dutton-Lainson Trailer Winch Model DL1602A
- Q&A: Replacement RV AC Unit for Dometic B57915.711J0
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Where is Brake Controller Install Port for 2018 Ford Explorer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can a 2020 Ram 2500 with Rambox Tow Fifth Wheel Trailer
- Q&A: Does 7-Way # 118272 Fit 2016 Ford Explorer
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Size of Factory Bolts For Installation of Curt Trailer Hitch Receiver in Factory Weldnuts
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size